1. Solder paste to solder paste clearance DRC. Shown below is the solder paste on two adjacent pins of a 16-TSSOP (0.173", 4.40mm Width) IC. As shown below the solder paste is 1:1 with the pad and has a 0.05mm (~3mil) soldermask pullback. Copper to copper feature and paste to paste is 0.2mm (~8mil).
The paste stencil would have a very long a skinny (0.2mm) web separating the solder paste blocks. The stencil could be damaged by the squeegee as the paste is applied. It would be nice if the tool included a minimum the paste to paste clearance check.
No comments:
Post a Comment