RF Copper Keepouts

Designing copper cutouts using design rules.

Design Rule

Not InNet('*') and IsTrack 

and  

IsVia

After applying above rule

That's it !

Step Model - Altium <> Solidworks

Here are some views in Solidworks for a project I'm currently working on.

AD17.0.9 has a new option to export boards as a Single Part.

click on images to view

As noted above parts can not be relocated in Solidworks when the step model is a single part, that was expected. 

Single parts are useful for defining envelopes, however single parts are not well suited for collaboration when parts need to be moved in Soildworks then and passed back to Altium.

Why the Power Jack and Audio Jack broke up was a bit of mystery, the answer and workarounds can be found in this post.

I also exported the Step Model with all parts (Not Single Part)

As noted above a couple of parts came in to Solidworks with shifted origins. The power jack broke in two pieces and the larger piece went to the upper right corner of the board. The BGA which was at the center of board also headed north east. And the 6 LEDs at lower edge disappeared.

Altium version: AD17.0.9

Solidworks versions: 16 and 17

I downloaded and installed Solidworks FREE 3D Viewer (eDrawings)

I looked at the same board (actually an older version of the board) using eDrawings. I may update the next two screen grabs later for an apples to apples comparison.

Single Part

All Parts




The step models look good in Solidworks eDrawings.

I did not experience the same broken and shifted parts that occurred in Solidworks.

Step Model: CUI P/N SJ-3566AN

You can download the SJ-3566AN.stp model at Digi-Key.

As shown above the step model looks good in Altium (AD17.0.9) 

Export the board with All Parts (Not Single Part)

click on image to view

Next place the exported 3D Body back into the pcb.

Looks good in Altium.

Next Export PCB as Single Part Step Model

Then I placed the exported 3D model into Altium.

No issues found in Altium.

Above is the design and both of the step models in Altium for the SJ-3566AN.stp

Next, using Solidworks FREE 3D Viewer (eDrawings)

Single Part 3D Step Model

Everything looks good in Altium and eDrawings.

Why is the imported step model broken in SolidWorks ?

Here is what's happening:

The first time you import the Step Model from Altium with all of it's parts, life is good, every thing looks right.

Then in Altium move or add few parts, export Step and import Step in Solidworks using the same project folder in SolidWorks, now the wheels start to fall off the bus.

In a nut shell what's happening is during subsequent imports using the same folder Solidworks get's confused if the file names of the parts are the same.

"There's an issue in solidworks that it caches (no way to turn this off) when assemblies are opened and closed and others opened with in the same session that have the same names.

Solidworks (at least in the versions we use), once it opens a part, does not look at absolute paths to same name parts. It just uses whatever was last opened in that session.

The only real way to do clear it is to end the Solidworks session."  Thank you Wayne M.

Workarounds in SolidWorks:

1) Delete all parts in the SolidWorks project folder where the first step model was imported, before importing the same board again.

or

2) Using Pack and Go in SolidWorks a user can rename or add a suffix to all of the parts to avoid these issues.

Related Links:

Reference 1:

"Use Pack and Go, try adding something to the filename (e.g. add suffix "-1"). So that all the inherently different models have different file names."

Source: Imported model with same part names implosion

Reference 2: (more Pack and Go)

SoildWorks Tech Tip: Renaming Imported Assemblies. - CAPUniversity

Workarounds in Altium:

1) "When you make the Step export from Altium, add a custom suffix, for the next export add a different suffix, you have to keep track of those manually, doesn't matter what they are they just need to be different then SW won't reuse the wrong one from its cache. i like them short, and AD unfortunately does not auto-check the radio button when you put something in the text field, i.e. it is too easy to type the suffix in but not actually add it, nor is it retained so you can keep track.

or

2) "Don't use Step, use the Parasolid Export instead, the file is a fraction of the size and the SW load time is seconds rather than minutes to rebuild the surfaces"

Source: Altium Community Forum: Dennis Saputelli. 

Thank you Dennis:)


Audio Jack Step Model Source File 'SJ-3566AN.stp' was downloaded from Digi-Key.

The File Header is:

ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('SJ-3566AN','2015-03-11T',('carefree'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010020',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010020','');
FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
ENDSEC;

That's it !

PCB Design White papers, Resources, & Best Practices - Altium

PCB Design White papers, Resources, & Best Practices - Altium:

'via Blog this'

Why is my polygon clearance rule ignored?

Why is my polygon clearance rule ignored? - English documentation - The Altium Wiki:

Tip:

Use IsNamedPolygon vice inNamedPolygon

Or 

(ObjectKind = 'Poly') And (Name like 'L1_RF_GND')

With wild cards

(ObjectKind = 'Poly') And (Name like '*L1_RF_GND*')

(ObjectKind = 'Poly') And (Name like '*L05_GND*')

Or

Design > Classes > PolygonClasses then use the polygon class in the Rule.

click on image to view

That's it !

Parts DBLib Library - FREE

The FREE Parts DBLib contains everything you need to get an Altium DBLib library up and running in less than 5 minutes.

Did you know ?

You do NOT need to have Access installed to use a DBLIB library in Altium.

Using Altium's DBLib interface you can edit and add parts to an Access database.

Take the challenge and see for yourself that you really can have your own fully functional DBLib library in 5 minutes or less.

Here are the steps to quickly setup and use the Parts DBLib library:

Download Parts DBLib.

Install the Parts DBLib Library in Altium. See Getting Started.

Use Altium's DBlib to edit or add parts to the database.

You are done, you should have a fully functional Altium DBLib library.

If you are looking for a more efficient way to edit and add parts to the database give the Parts Frontend a test drive. 

The Parts DBlib download includes a demo version of the Parts Frontend.  A Frontend application is not required to use an Altium DBLib or SVNDBLIB library.

When using a well designed database Frontend you will spend significantly less time designing library parts, leaving you with more time to design boards.

What Makes Parts Different ?

That's It !